You are here: Experiment Guide > MIRO > MIRO Cameras > Camera Selection

Camera Selection

Unsupported External Cameras

Change the Camera Selection if you wish to use an external camera that is not supported by NanoScope/MIRO. Click the appropriate (External or Internal) button in the Camera Selection panel of The Configuration Tab to select your camera:

Previous Steps:

  1. Camera Installation

Next Steps:

  1. Camera Configuration and controls
  2. Troubleshooting

 

www.bruker.com Bruker Corporation
www.brukerafmprobes.com 112 Robin Hill Rd.
nanoscaleworld.bruker-axs.com/nanoscaleworld/ Santa Barbara, CA 93117
   
  Customer Support: (800) 873-9750
  Copyright 2010, 2011. All Rights Reserved.